SPECIALIST INTERNATIONAL SUPPLIER OF PVC STRIP - SHEET AND CURTAINS TO THE TRADE
Insulated shroud mats are designed to protect engineers from electric shocks when working in front of open switchboards.
Known for their insulation properties, the mats comply with electrical class 0 and can work in a temperature range from -10°C to +55°C. They are straightforward to clip or clamp on in front of circuit boards, and can be cut to any size required.
• Material 1mm thick
• Conforms to BS EN 61112:2009 voltage proof tests and flame retardant tests.
• All PVC confirms to REACH standards.
Available in the following sizes:
400 x 450
900 x 600
QUICK ONLINE QUOTE TODAY
Need a quick quote?
Use our interactive quote tool
CALL FOR A QUOTE 01260 295999
As a rule of thumb 200/2 for 2m x 2m, 300/3 for 3m x 3m, 400/4 4m x 4m and above. We strongly recommend ribbed material for all openings with forklift traffic.
Standard PVC is suitable between +38°C to -10°C, whereas polar is suitable from +10°C to -35°C.
This product was designed for kitchen / catering establishments, maximising ventilation yet still offering a barrier against airborne pests.
Our PVC cannot be classified as flame retardant, it can only be classified as “self-extinguishing”, therefore will cease burning once the naked flame / heat source has been removed.
No, only the bolt-on (heavy duty) system is compatible with any of the sliding curtain options.
Both extreme heat and cold. – Standard PVC is suitable from +38°C to -10°C, polar (low temp) PVC is suitable from +10°C to -35°C
PVC, although suitable for these areas, will not have a long lifespan if installed within these corrosive environments. The stainless track will corrode as it is not marine grade steel. Please contact us to discuss if unsure.
Although the ribbed material is indeed transparent vision would be a little obscured / impaired due to the vertical ribs.
The greater the strips overlap then the better heat / noise retention is maintained. Maximum / full overlap is always strongly recommended for any openings over 3 metres high.
PVC strips should only be wiped down with luke warm water and using only a mild detergent or washing up liquid. Strong chemicals, bleaches or if excess water is left on the strips then it will cause the strips to cloud / turn milky, eventually turning white and become opaque. This then creates a H&S issue and strips should be replaced immediately.
we don't just supply, we install too
To complete your order, we also provide installation on all screens and hanging systems. To avoid any confusion with your customers, our expert fitters install using unbranded vans and uniforms.
In addition, we are able to offer a pre-installation on-site survey, where our team meets with you to discuss your needs, and suggest the best methods and products to ensure complete satisfaction from initial enquiry right through to installation